L/D
RATIO:: 23:1
HORSE POWER:: 15 H.P.
VOLTAGE:: 230/3/60
GEAR RATIO:: 4.3:1 |
NEW
- NEVER USED
Co-rotating, intermeshing screws, lab extruder
15 H.P. Magnetek drive, 1750 RPM base speed
Drive rated 1.0 service factor
AC Inverter motor
Vector microprocessor
Controller: 1024 Pulse/revolution digital encoder
for closed loop motor speed feedback
Drive: A.C. Vector, 110/1/60
VCD Digital, 703 Flux vector controlled
Has IGBI Technology, 32-Bit microprocessor, 16-Bit
DSP and 2 each - 256K EPROMs
EQUIPPED WITH:
Acrison single auger volumetric type feeder
Screw is 1" in diameter
Acrison 060 SCR controller with on/off switch
Feeder output is 0.077 - 2.3 cubic feet/hour
Gearbox: Cast iron - belt driven
Ratio of 0.837:1
Overall drive ratio of 3.6:1 and a maximum screw
speed of 500 RPM
Max. motor speed 1800 RPM
Baseframe of extruder provided with casters
Painted W&P standard gray color |
